First, a word from our sponsers:

In Memoriam Linuxlots (http://www.linuxlots.com/~dunne), 1999 -- 2011, R.I.P.

You are here: http://dunne.yenn.ulegend.net//t23.html

Go to: index | blog | contact


IBM Thinkpad T23

Specs


short:
Pentium III 1Ghz CPU, 512MB RAM, 80GB HDD.

long:

OpenBSD 5.8 (GENERIC) #1066: Sun Aug 16 02:33:00 MDT 2015
    deraadt@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium III ("GenuineIntel" 686-class) 1 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR,SSE,PERF
real mem  = 536231936 (511MB)
avail mem = 513171456 (489MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 09/19/01, BIOS32 rev. 0 @ 0xfd820, SMBIOS rev. 2.3 @ 0x1fff0000 (46 entries)
bios0: vendor IBM version "16ET27WW (1.07 )" date 09/19/2001
bios0: IBM 26479EG
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP BOOT
acpi0: wakeup devices LID_(S3) SLPB(S3) PCI0(S4) USB_(S1) UART(S3) DOCK(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiec0 at acpi0
acpicpu0 at acpi0: !C3(@65 io@0x1015), !C2(@1 io@0x1014), C1(@1 halt!)
acpipwrres0 at acpi0: PSER, resource for UART
acpipwrres1 at acpi0: PSIO, resource for FDC_, UART, LPT_, ECP_, FIR_
acpitz0 at acpi0: critical temperature is 97 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "ThinkPad Battery" type LION oem "IBM Corporation "
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad at acpi0 not configured
acpidock0 at acpi0: DOCK not docked (0)
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1800 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "S3 Savage/IX-MV" rev 0x13
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
cbb0 at pci0 dev 2 function 0 "TI PCI1450 CardBus" rev 0x03: irq 11
cbb1 at pci0 dev 2 function 1 "TI PCI1450 CardBus" rev 0x03: irq 11
fxp0 at pci0 dev 3 function 0 "Intel 8255x" rev 0x0c, i82550: irq 11, address 00:03:47:b9:dd:41
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
"AT&T/Lucent LTMODEM" rev 0x01 at pci0 dev 3 function 1 not configured
clcs0 at pci0 dev 5 function 0 "Cirrus Logic CS4280/46xx CrystalClear" rev 0x01: irq 11
ac97: codec id 0x43525914 (Cirrus Logic CS4297A rev 4)
ac97: codec features headphone, 20 bit DAC, 18 bit ADC, Crystal Semi 3D
piixpcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02: SpeedStep
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: 
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0:  ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 11
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x03: SMI
iic0 at piixpm0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0xb0
pcmcia1 at cardslot1
isa0 at piixpcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt2 at isa0 port 0x3bc/4: polled
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on wd0a (89349de30c2fb4c3.a) swap on wd0b dump on wd0b
clcs0: firmware loaded
audio0 at clcs0

Full specs here

OS

OpenBSD 5.8

Problems
Apart from that? It "just works".


Viewable with any browser

This page was brought to you by ksh, vi, m4, sed & make, courtesy of openbsd.
Last changed: Tue Nov 8 17:32:18 CET 2016

pay no attention to the 1x1 gif behind the curtain!